BriteLyt double tie mantle support for all lamps


BriteLyt, Inc.
9516 Lake Dr.
New Port Richey, FL. 34654
USA
Ph: 727-856-9245
Fax: 727-856-7715

BriteLyt Multi-Fuel Lanterns, Stoves, & Petromax Lanterns
Home Of the World Famous Multi-Fuel Lantern

Petromax / BriteLyt DOUBLE TIE MANTLE SUPPORT INSTRUCTIONS

DOUBLE TIE MANTLE SUPPORT INSTRUCTIONS

Visit our web store for this item

Part 117 and part 1 BriteLyt Lanterns

REQUIRED PARTS: Part #1 -  Mantle  Support
Part #4-2T - Double Tie Mantle.

INSTALLATION:

1. Take Part #117 inner casing out of lantern. (See photo)
Above

2. Take out Part #3 nozzle, and install part #1 mantle support.  (see photos) Below

Part 117 and part 3
Part 117 and part 1
 Part 117 part 3 and part 1


 Make sure the mantle support is opposite of the hole in part #117 where #50 goes into (see photos).


 

3. Tie mantle to nozzle first, then take the bottom hole of the mantle, and tie it to the mantle support nozzle. It’s ok to insert the nozzle on the mantle support, into the mantle a little. ( see photos below) (  also cut off excess string)

Part 1 and 4-2T
 

 BriteLyt Petromax 2 Tie Mantle
 Mantle in action
 
 


This site and all associated web pages © 1996-2008 BriteLyt. All rights reserved. No images may be used without written permission.

Britelyt, EZ-Cook , EZ-Pump,O-Ring pump system and stove are the registered trademarks and Patents # 6,439,223, # 6,688,877 and # 6,863,526 of Diana Draper.

All other trademarks are properties of their respective owners.

Web Site by Preferred Partners, LLC