1 |
Mantle Support |
102 |
Counter nut for conducting rod |
4-2-T |
Double support mantle 2 tie hole |
103 |
Conducting piece |
3-ss |
Stainless nozzle |
104 |
Conducting rod complete |
3 |
Nozzle |
105 |
Excentre |
4 |
Soft mantle 1 tie hole |
107 |
Nipple for wheel |
6-O-ring |
Pump piston complete |
108 |
Graphite packing |
10 |
Pump valve complete |
111 |
Hand-wheel or on and off knob |
11 |
Washer for filling screw w/gauge #149 |
112 |
Nut for wheel |
14 |
Screw for center bottom part #122 |
113 |
Sleeve nut for excentre |
17 |
Check valve cone w/rubber |
114 |
Excentre complete |
18 |
Spring for check valve |
117 |
Inner casing complete |
20 |
Clip |
118 |
Container with out fittings (Fuel Tank) |
21 |
Screw |
119 |
Key for needle |
| |
|
121 |
Frame- w/name tag |
22 |
Cross-bar |
122 |
Center bottom plate |
33 |
Mixing tube with regulating screw |
123 |
Hood with top |
33-B |
Mixing tube (High Performance) |
125 |
Inner casing with parts |
34 |
Gas chamber |
149 |
Filling screw gauge |
35 |
Heating cup |
152 |
Vaporizer upper part |
40 |
Pump Knob |
153 |
Vaporizer lower part |
41 |
Fixing disc |
165 |
Plastic filling funnel w/sieve |
42 |
Cap for pump barrel |
180 |
Cleaning needle for RAPID pre-heater device |
43 |
Pump piston-rod |
187 |
Sieve for RAPID pre-heater device |
44 |
Spring for pump piston |
191 |
Valve bar |
45 |
Pump piston plate |
193 |
Valve washer (check valve) |
46 |
Leather washer |
194 |
Valve spring |
46-O-ring |
O-ring pump system |
196 |
Vaporizer valve complete |
47 |
Pump piston nut |
220 |
Flame protecting tube |
50 |
Nipple |
221 |
Nipple for RAPID pre-heater |
66 |
Spanner with gauge |
222 |
Nut for nipple |
67 |
Alcohol tray filling bottle |
223 |
Tip complete |
68 |
Needle |
224 |
Connecting piece for RAPID pre-heater |
74 |
Glass chimney or Glass Globe |
225 |
Connecting piece for complete pre-heater(224,90,187) |
83 |
Valve washer for part #10 |
226 |
RAPID pre-heating device complete |
90 |
Lead washer for vaporizer and preheating device |
227 |
Disc for wheel part 111 on and off knob |
98
101
126-s |
Pump barrel
Conducting rod
Heat Shield |
229
13 |
Check packing with screw for RAPID pre-heater
bleeder screw for gauge 149 |
| |
|
|
|
500/350CP or HK parts in photo below.
 
 
Above Parts on this page are for 150CP / 250CP / 350CP & 500CP or HK
(Part #74) Our Glass Globes / Chimneys see web store
This BriteLyt accessory is a concave mirror of 17 mm collapsible fixing straps.
It fits all BriteLyt and Petromax generation of lanterns (for 150CP,250CP, 350CP,& 500CP).
The side reflector amplifies the light power three times and leads the beam into the wished direction.
Top Reflector
Number 500R ,500PBR, 500MFR
35 cm for 826,523,828,829(350CP and 500CP).
The BriteLyt Top reflectors concentrates the light and spreads it without shadows.
BriteLyt is the only company that makes its reflectors out of brass.
We make top reflectors to fit all Petromax generation of lanterns in 150CP,350CP & 500CP
! Below: Parts will work only on the size thats listed with that part !
Part #126-s / Made of Stainless Steel (250CP, 350CP, or 500CP).
For All Generations of 826,523,828,829 Lanterns.
A Necessity for all 500CP and 350CP lanterns.
Equipped on all New BriteLyt Lanterns
The use of this accessory allows the further operating of the lamp for a short while with a broken mantle, without danger of unsoldering of the container, (part 118) And keeps the container cooler to the touch.
Below: Photos of BriteLyt's New # 46 O-Ring system.. W/ Oring All sizes 150CP,250CP,350CP and 500CP.
  
See some of our Patented systems
Above photo of #BHA - BriteLyt Heating Adaptor NEW(350CP or 500CP or HK ONLY)
Below photo of
#HPBHA Heat Shield with BriteLyt Heating Adaptor (350CP or 500CP)
Visit our web store for BHA and HPBHA prices
Some items on this page are Patented by BriteLyt
|
